Goodmans Micro 1990 DVDF - Programmed Playback; Title Menu (DVD Only); Root Menu (DVD Only); Menu Navigation (DVD Only)

28
CD:
Press the REPEAT button to cycle through the available repeat modes as follows:
6.8 Programmed Playback
Press the PROG button. The programme entry screen will be shown on screen.
Enter the first track using the numerical buttons. To enter a track higher than 9
use the +10 key. For example to enter 25 press the +10 twice and then the 5
button. To enter further tracks use the numerical buttons using the same method.
To edit a programme use the directional buttons to highlight the track that is to be
changed then enter the track as above. To clear a programme use the directional
buttons to highlight “CLEAR” and then press ENTER. To begin playback of a
programme use the directional buttons to highlight “PLAY” and then press ENTER.
6.9 Title Menu (DVD only)
Press the TITLE button to display the title menu of the DVD. (Please note the title
menu varies between discs. Also not all DVD discs will have a title menu).
6.10 Root Menu (DVD only)
Press the DVD MENU button to display the root menu of the DVD. (Please note
the Root menu varies between discs. Also not all DVD discs will have a root
menu).
6.11 Menu Navigation (DVD only)
Use the direction keys to navigate through the options available when a menu is
displayed on the TV. Directional keys are also used for selecting tracks when
listening to an MP3 CD. After a selection has been highlighted using the
directional keys press the enter button.
Repeat 1: repeat the
currently track
Repeat All: repeat all
tracks
Repeat OFF: repeat is turned off
and disc will play as normal
REP: [1]
REP: [ALL]
REP: [OFF]
6. CD/DVD Operation (cont)