52
To set an event, Highlight its mode button using the [UP] or [DOWN] keys and
press [SELECT] to display the timer entry window. Here the five settings of
channel name, start time, end time; date and frequency mode can be set. You can
move freely between each setting using the [UP] and [DOWN] keys. The channel
name is set using the[LEFT] or [RIGHT] keys to display the channel which
broadcasts the programme to be recorded. The start time, end time and date are
each set with the number keys on there mote control in 24-hour format. The
frequency mode determines how often the receiver operates this event and is set
with the [LEFT] or [RIGHT] keys to be either Once, Daily, or Weekly.
Hint: If an invalid number for the start or end times or the date is entered, the
highest valid number is automatically entered in its place. So, entering 28:30 as
the time will automatically change to 23:30, and a date of 15:14:2002 will change
to15:12:2002.
Pressing [MENU] or [SELECT] returns to the Timer screen with the settings in
place in the timer event list. The event mode is automatically set to Active and you
can now return to normal viewing (press the [MENU] keys) and at the appointed
time the receiver will switch over to the required channel and at the end of the
event, switch the receiver to standby.
Hint:
If you are watching digital terrestrial TV at the time the timer event starts, a message
is flashed onto the screen announcing that the receiver is' Switching to timer channel' so
you understand what is happening.
When the Timer screen is displayed, any event can be set to be Inactive (so it will
not occur) or the channel, times and frequency mode altered by highlighting the
event's Mode button and pressing [SELECT] as before.
11. DVB-T Advanced operation
To Next Page
Loading...
