Goodwe GW6.5K-ET Quick Guide

5 pages

To Next Page

Residential Smart Inverter Solutions Quick Guide (ET 5-10kW+Lynx Home F)

V1.0-2024-04-30

Device Model Description

Inverter

GW5KL-ET

GW6KL-ET

GW8KL-ET

GW10KL-ET

GW5KN-ET

GW6.5KN-ET

GW8KN-ET

GW10KN-ET

Battery system

Lynx Home F (G2)

LX F9.6-H-20

LX F12.8-H-20

LX F16.0-H-20

LX F19.2-H-20

LX F22.4-H-20

LX F25.6-H-20

Lynx Home F

,F Plus

L X F 6 . 6 - H

LX F9.8-H

LX F13.1-H

LX F16.4-H

• A maximum of 8 battery systems can be clustered in a system.

• Do not mix connect battery systems of di󽗈erent versions.

Smart meter GM3000

GM3000: GM3000 and the CT, which cannot be replaced, are

included in the inverter package. CT ratio: 120A/40mA.

Communicati-

on module

• Wi-Fi Kit

• 4G Kit-EC or 4G Kit-AU

01 Networking

02 Power On/O󽗈

WARNING

The information in this quick guide is subject to change due to product updates or other reasons. This guide cannot

replace the product labels or the safety precautions in the user manual unless otherwise specied. All descriptions in

the manual are for guidance only.

Power on/o󽗈

③ : Install or not based on

local laws and regulations

1 2 3

GW5K-ET

GW6.5K-ET

GW8K-ET

GW10K-ET

Other manuals for Goodwe GW6.5K-ET

User Manual80 pages

Questions and Answers:

C
Crystal LoweAug 26, 2025
Why is my Goodwe Inverter showing a utility loss?
- G
  Garrett MorenoAug 26, 2025
  If your Goodwe Inverter is showing a utility loss, it could be due to a failure in the utility grid power or because the AC cable is disconnected, or the AC circuit breaker is off. Once the grid power supply is restored, the alarm should automatically clear. Ensure the AC cable is securely connected and the AC circuit breaker is turned on.
L
lopezbrendaAug 25, 2025
How to troubleshoot on-grid and backup connections in Goodwe Measuring Instruments?
- A
  Adriana MitchellAug 26, 2025
  To resolve on-grid and backup connection problems with Goodwe Measuring Instruments, verify that the on-grid is connected to the power grid and the backup is connected to the loads. Also, check that the polarities (e.g. L1/L2/L3/N) are correctly aligned.
S
Stephen RoseAug 25, 2025
What to do if Smart Meter & CT connections are not working on Goodwe Measuring Instruments?
- A
  Ashley ParkerAug 25, 2025
  To resolve issues with Smart Meter & CT connections in your Goodwe Measuring Instruments, ensure that the Smart Meter and CT are properly connected between the house loads and the grid. Also, make sure to follow the Smart Meter direction sign on the CT.

Goodwe GW6.5K-ET Specifications

General

Model	GW6.5K-ET
Rated Output Power	6500 W
Max. DC Input Voltage	1000 V
Number of MPPT Trackers	2
Rated AC Output Power	6500 W
Max. AC Apparent Power	6500 VA
Max. AC Output Current	28.3 A
Nominal AC Voltage	230 V
AC Voltage Range	180 - 280 V
Nominal Grid Frequency	50 / 60 Hz
Total Harmonic Distortion (THD)	< 3%
Max. Efficiency	98.3 %
Euro Efficiency	97.5 %
DC Switch	Yes
Protection Degree	IP65
Cooling Method	Natural convection
Warranty	5 years
Operating Temperature Range	-25 °C to +60 °C
Communication	RS485 / WiFi
MPPT Voltage Range	200-800 V
Power Factor	> 0.99 (adjustable ±0.8)