Why is my Goodwe Inverter showing a utility loss?
If your Goodwe Inverter is showing a utility loss, it could be due to a failure in the utility grid power or because the AC cable is disconnected, or the AC circuit breaker is off. Once the grid power supply is restored, the alarm should automatically clear. Ensure the AC cable is securely connected and the AC circuit breaker is turned on.
How to troubleshoot on-grid and backup connections in Goodwe Measuring Instruments?
To resolve on-grid and backup connection problems with Goodwe Measuring Instruments, verify that the on-grid is connected to the power grid and the backup is connected to the loads. Also, check that the polarities (e.g. L1/L2/L3/N) are correctly aligned.
What to do if Smart Meter & CT connections are not working on Goodwe Measuring Instruments?
To resolve issues with Smart Meter & CT connections in your Goodwe Measuring Instruments, ensure that the Smart Meter and CT are properly connected between the house loads and the grid. Also, make sure to follow the Smart Meter direction sign on the CT.
General| Model | GW6.5K-ET |
|---|---|
| Rated Output Power | 6500 W |
| Max. DC Input Voltage | 1000 V |
| Number of MPPT Trackers | 2 |
| Rated AC Output Power | 6500 W |
| Max. AC Apparent Power | 6500 VA |
| Max. AC Output Current | 28.3 A |
| Nominal AC Voltage | 230 V |
| AC Voltage Range | 180 - 280 V |
| Nominal Grid Frequency | 50 / 60 Hz |
| Total Harmonic Distortion (THD) | < 3% |
| Max. Efficiency | 98.3 % |
| Euro Efficiency | 97.5 % |
| DC Switch | Yes |
| Protection Degree | IP65 |
| Cooling Method | Natural convection |
| Warranty | 5 years |
| Operating Temperature Range | -25 °C to +60 °C |
| Communication | RS485 / WiFi |
| MPPT Voltage Range | 200-800 V |
| Power Factor | > 0.99 (adjustable ±0.8) |
Provides general safety guidelines for operation and installation.
Details safety precautions specific to PV string connections.
Covers critical safety measures related to inverter operation and handling.
Outlines safety procedures for battery integration and usage.
Specifies environmental and site requirements for installation.
Step-by-step instructions for mounting and installing the inverter.
Critical safety warnings before performing electrical connections.
Illustrates how to wire the inverter within the system.
Instructions for connecting solar panel input cables.
Procedure for safely shutting down the inverter.
Common faults, causes, and solutions for inverter issues.
To Next Page
