243912
During oven operation, you may change the
temperature (see section “Selecting and setting the
oven temperature”), timer functions.
After the end of cooking and when the oven is turned
off, the temperature display will indicate the falling
temperature until it reaches 50°C.
B Cooking by selecting the type of food (L) (only with
control unit 2)
This operation mode enables preparing food by automatic setting
of the heating system, temperature, and cooking duration.
• Touch the food type selection key (L) to select the type of
food (the corresponding food symbol will light up, along with
the relevant heating system, cooking level /shelf height,
temperature, and cooking duration).
• There is also use the option to set the end of cooking time, or
delayed cooking start (see section “Timer functions”). Press
the (C) key “start/stop” to turn on the oven.
• The temperature display (I) will indicate the rising temperature
in the oven. When the preset temperature is reached, a beep
will sound and the symbol (I1) will go off.
• The set operation time will count down; after it has elapsed,
the oven will go off.
Preset temperatures and oven operation times can be changed
to any desired setting.
• If you are not happy with the preset temperature, changed it by
touching the (I) key and the use the (H) keys “+, -” to change
the temperature to the desired value (in 5 degree steps).
Confi rm the setting by pressing the (I) key again; if no other
key is pressed, the setting will be adopted automatically after a
few seconds.
• To change the preset cooking time, press the (G) key and
then use the (H) keys “+, -” to change the cooking time to the
desired value. Confi rm the setting by pressing the (G) key
again; if no other key is pressed, the setting will be adopted
automatically after a few seconds.
Temperature can also be changed during oven
operation (see section “Selecting and setting the oven
temperature”); the same applies to timer functions (see
section “Timer functions”).
12
To Next Page
Loading...
Need help?
General