Gorilla 47027 Greyback - Attach Platform Section to Tree

10
• Never attach a treestand to limbs. Always attach a treestand to the main
trunk of the tree.
• Never use a treestand on trees with icy, wet, slippery, loose or
scaly bark.
• Never hunt out of a treestand at heights at which you are not completely
comfortable. Depending upon the tree and hunting conditions,choose
the minimum height that allows for safe and effective hunting.
Remember, the higher the height, the greater the risk.
Attach Platform Section to Tree
Prepare Platform Section
At the base of the tree, remove the bungee cord that holds the platform
section and seat section together (FIGURE 1). Unfold the pivoting arms
on the seat section of the climbing treestand (FIGURE 2).
Separate the platform section from the seat section so the platform
section is below the seat section (FIGURE 3) and the tether is directly
in line (not wrapped around either section) between the two sections
(FIGURE 4).
4
4.1
FIGURE 1
FIGURE 3
FIGURE 2
FIGURE 4
Platform
Seat