14 GOSSEN METRAWATT GMBH
Display – Setpoint Selection – Operation
W2
A2
A1
II
I
R2XX0
GOSSEN METRAWATT
Actual value
Setpoint value / PWR (pulse width ratio)
Setpoint 2 active
Off
Switching output I active
Switching output II active
Alarm(s) active
Press and hold:
Press briefly:
Shift setpoint value ↔ PWR
Press and hold:
Changeover to parameter level
(see operating flowchart)
Up and down scrolling keys for setpoint value
selection (and parameter setting)
The value is changed directly. After 2,5 s or after
pressing key , the value is stored to memory and
becomes active.
This is acknowledged by a brief blackout of the display.
Switchover Off ↔ automatic operation
To Next Page
Loading...
