EasyManua.ls Logo

Gossen MetraWatt R2080 - Technical Data

Gossen MetraWatt R2080
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GOSSEN METRAWATT GMBH 31
Technical Data
For complete technical data refer to the following data sheets:
Controller R2080: Order no. 3-349-216-03
Controller R2100: Order no. 3-349-217-03
Controller R2180: Order no. 3-349-218-03
Annual mean relative humidity, no condensation 75%
Ambient temperature
Nominal range of use
Operating range
Storage range
0 °C ... + 50 °C
0 °C ... + 50 °C
–25 °C ... + 70 °C
Aux. Voltage Nominal Ranges of Use Power Consumption
Nominal Value Voltage Frequency
AC 110 V /
AC 230 V
AC 95 V ... 253 V 48 Hz ... 62 Hz
Max. 10 VA
typically 6 W
Relay Output Floating, normally open contact
Switching capacity AC/DC 250 V, 2 A, 500 VA / 50 W
Service life > 210
5
switching cycles at nominal load
Interference suppression Utilize external RC element (100 - 47 nF)
at contactor
Transistor output suitable for commercially available semiconductor relays
(SSR)
Switching Status Open-Circuit Voltage Output Current
Active (load 800 ) < DC 17 V 10 ... 15 mA
Inactive < DC 17 V < 0.02 mA
Overload limit Short-circuit, continuous interruption
Electrical Safety
Safety class II, panel-mount device, DIN EN 61010-1 section 6.50.4
Fouling factor 1, per DIN EN 61010-1 section 3.7.3.1 and/or IEC 664
Overvoltage category II, per DIN EN 61010 appendix J and/or IEC 664
Operating voltage 300 V per DIN EN 61010
EMC requirements IEC/EN 61326

Related product manuals