Gossen MetraWatt R2080 - Operating Flowchart

GOSSEN METRAWATT GMBH 15
Operating Flowchart
I
II
A1
A2
W2
Act. val.
Automatic Operation
PARAMETER LEVEL
Off
OPERATING LEVEL
CONFIGURATION
Press key briefly
Press and hold key
until the display is switched
Press and hold both keys,
until display is switched
(page 16)
(page 25)
Only appears when heating
current monitoring is activated.
Setpoint can only
be selected here.
I
II
A1
A2
W2
Act. val.
Setpoint
I
II
A1
A2
W2
Act. val.
Heat. curr.
I
II
A1
A2
W2
Act. val.
PWR
I
II
A1
A2
W2
Param. value
I
II
A1
A2
W2
Param. value
I
II
A1
A2
W2
I
II
A1
A2
W2
Off
– no alarm function
– no error signalling
– The actuating outputs are inactive
unless keys are pressed.
– By pressing key /
switching output I („heating“) /
II („cooling“) is directly controlled.
I
II
A1
A2
W2
Act. val.