Gossen MetraWatt R2080 - Identification of Controller R2080

GOSSEN METRAWATT GMBH 5
Identification of Controller R2080
Features A3, A13, C23 and E3 of controller GTR0208
cannot be replaced.
Feature B2 is not compatible with GTR0208.
Auxiliary voltage is generally AC 110 … 230 V.
A switch to deactivate the control outputs is always
available (see feature F1 of controller GTR0208).
Generally, the actual value and the setpoint value and/
or heating current are indicated.
As a rule, setpoint limiting is available.
Feature
Designation
Electronic PDPI controller R2080
Controller types
2-step controller medium time response A01
2-step controller with limit contact medium time response A02
3-step controller medium time response A04
2-step controller short time response A11
2-step controller with limit contact short time response A12
3-step controller short time response A14
without feedback with 1 limit contact A21
without feedback with 2 limit contacts A22
Measuring ranges
Thermocouple type L Fe-CuNi 0 … 200 °CC01
0 … 400 °CC02
0 … 600 °CC03
type J Fe-CuNi 0 … 200 °CC04
0 … 400 °CC05
0 … 600 °CC06
0 … 800 °CC07
type K NiCr-Ni 0 … 400 °CC08
0 … 600 °CC09
0 … 800 °CC10
0 … 1200 °CC11
type R Pt13Rh-Pt 0 … 1600 °CC12
type S Pt10Rh-Pt 0 … 1600 °CC13
Resistance thermometer Pt100 0 … 100 °CC20
0 … 200 °CC21
0 … 400 °CC22
–100 … +100 °CC24
–100 … +200 °CC25
Output type 1
st
switching point
Relay D1
Transistor D2