Gossen MetraWatt R2600 - Storage and Uploading of Device Settings

GOSSEN-METRAWATT GMBH 23
Storage and Uploading of Device Settings
Code Function Note
The current setting
1)
is stored as a user defined default setting.
1) Configuration digits and all parameters except for the interface address Addr.
Configuration according to customer specifications (K9) is stored in
this location and is thus overwritten.
The user defined default setting is uploaded
1)
.
If a setting has never previously been stored with d, the factory
default setting, or the configuration in accordance with customer
specifications (K9), is uploaded.
All entries are overwritten, including the results of self-optimization
and calibration.
The factory default setting
1)
is uploaded.