GOSSEN-METRAWATT GMBH 39
Alarms
During parameter setting and/or configuration, the operating level is entered 10 s after the value setting is ended.
Display (only on operating level) Error source Reaction Remarks
Heating current flashes Heating current monitor Alarm output A1 active and LED A1 on
NOC/NCC defined in the
configuration digits "Alarms 1
and 2". LED flashes on all levels
Actual value flashes Limit monitor 1 Alarm output A1 active and LED A1 on
Actual value flashes Limit monitor 2 Alarm output A2 active and LED A2 on
To Next Page
Loading...
