GOSSEN-METRAWATT GMBH 27
Continuous output = “select with Cont” (configuration digit “Unit of measure of the sensor / continuous output” = 8, 9, A, b)
Cont Contin. output Remarks
actual
set point
The output is scaled with the parameters rn L and rn H (with differential controller the actual value difference).
The controller types act same as with marking A2.
„Cool“
reg. ratio
Negative regulation ratios are continuously output, the switching output II remains inactive.
Controller type = 4: corresponds to split-range controller with inverted output action.
To Next Page
Loading...
