Gossen MetraWatt R2600 - Page 7

GOSSEN-METRAWATT GMBH 7
Bild 1, Switch-over of auxiliary voltage C1 ↔ C2, serial interface RS 485 ↔ RS 232
Connection plug Connection from the side
Connection from the rear
D0
D1
Data interface None
RS 485 / RS 232 internal switch-over possible
F0
F1
Configuration Default setting
Setting as per customer's request
K0
K9
Operating German / English
instructions French / Italian
None
L0
L1
L2
230V110V230V110V
Marking C1 (230 V)
Marking C2 (110 V)
RS 485
RS 232
Transfo
Data interface
See operating instructions
No. 3-348-518-15
for more information
on the data interface
When changing the aux. voltage setting, enter the correct voltage on the nameplate (plug-in module) and on the connection diagram (case)!