Need help?Do you have a question about the GPRINTER GP-3120TL and is the answer not in the manual?
Defines the label width and length using specified units (inch or mm).
Defines the gap distance between two labels or continuous label setting.
Defines black mark distance and extra label feeding length after printing.
Defines extra label feeding length, adjusting label stop position.
Defines the print speed of the printer in inch per second.
Designates the level of darkness for printing, from lightest to darkest.
Defines the printout direction of the label, memorized in EEPROM.
Defines the reference (origin) point of the label based on coordinates.
Fine-tunes the entire label position up or down from its current position.
Feeds the label forward by a specified length in dots.
Feeds the label backward by a specified length in dots.
Prints the label format stored in the image buffer.
Draws a line or bar on the label format using specified coordinates and dimensions.
Prints 1D barcodes on the label form with various code types and parameters.
Draws bitmap images onto the label using specified coordinates and data.
Draws rectangles on the label using specified corner coordinates and line thickness.
Clears a specified region in the image buffer with given dimensions.
Prints QR codes onto the label with various error correction and encoding options.
Prints text on the label with specified font, rotation, and multiplication factors.
Saves files (program, data, graphics) in printer memory (DRAM or Flash).
Sets counter numbers and their increments in the program.
Controls label printing and feeding based on key presses.
Counts the number of pieces of labels that have been printed.
General| Brand | GPRINTER |
|---|---|
| Model | GP-3120TL |
| Category | Barcode Reader |
| Language | English |
To Next Page