Need help?Do you have a question about the GPRINTER GP-3120TN and is the answer not in the manual?
Defines the label width and length using metric or inch units.
Sets the print speed of the label printer.
Adjusts the darkness level of the printed output.
Defines the printout direction and orientation on the label.
Prints various types of 1D barcodes on the label form using specified parameters.
Draws bitmap images on the label format, not standard BMP graphic files.
Prints text on the label with specified font, rotation, and magnification.
Obtains printer status through serial port by sending an ESCAPE character.
Resets the printer, potentially deleting downloaded files in DRAM.
Saves files (program or data) into the printer's memory (DRAM/Flash).
Executes a program that is resident in the printer's memory.
Returns the absolute value of an integer, floating point, or variable.
Executes statements conditionally based on specified conditions.
Converts a value or expression into a corresponding string of characters.
Sets counter numbers and their increments for programs.
Defines communication parameters for the printer's serial port.
A variable used to count the number of labels printed.
General| Max Print Width | 80mm |
|---|---|
| Print Speed | 127mm/s |
| Resolution | 203 DPI |
| Connectivity | USB, Serial, Ethernet |
| Type | Thermal |
| Print Method | Direct Thermal |
| Print Width | 80mm |
| Memory | 8MB SDRAM |
| Supported Barcode Types | Code 39, Code 128, UPC-A, UPC-E, EAN-13, EAN-8, ITF, Codabar |
| Power Supply | DC 24V/2.5A |
To Next Page