Need help?Do you have a question about the GPRINTER GP-3150TIN and is the answer not in the manual?
Defines the label width and length in inches or millimeters.
Sets the gap distance between two labels or defines continuous labels.
Configures black mark distance and extra label feeding length.
Sets the print speed of the printer in inches per second.
Designates the printing darkness level from 0 to 15.
Defines the printout direction (0 or 1), memorized in EEPROM.
Defines the reference point (origin) of the label format.
Prints the label format stored in the image buffer.
Draws a line or bar on the label format using specified coordinates and dimensions.
Prints 1D barcodes on the label, supporting various barcode types.
Draws bitmap images on the label using pixel data.
Draws rectangles on the label with specified start/end points and line thickness.
Prints QR codes with configurable ECC levels, cell width, and rotation.
Prints text on the label with font selection, rotation, and scaling.
Obtains printer status via serial port; returns readiness status.
Saves files (program, data, graphics, fonts) into printer memory.
Deletes specified files from printer memory (DRAM or FLASH).
Executes a program resident in the printer's memory.
Opens a downloaded file and establishes a file handle for access.
Sets counter numbers and their increments for program variables.
Defines communication parameters (baud, parity, data, stop) for the serial port.
Controls label printing behavior based on FEED button presses.
Counts the number of labels printed; persists across power cycles.
General| Model | GP-3150TIN |
|---|---|
| Print Resolution | 203 DPI |
| Print Method | Direct Thermal |
| Print Speed | 127 mm/s |
| Connectivity | USB |
| Operating System Compatibility | Windows |
| Memory | 4MB Flash |
| Power Supply | AC 100-240V, 50-60Hz |
| Type | Thermal Transfer Barcode Printer |
To Next Page