GPRINTER GP-3150TIN - FEED Command; BACKFEED & BACKUP Command

 FEED
Description
This command feeds label with the specified length.
The length is specified by dot.
Syntax
FEED n
Parameter Description
n unit: dot
1 ≤ n ≤ 9999
Example
FEED 40
Note: 203 DPI: 1 mm = 8 dots
300DPI: 1mm = 12 dots
See Also
BACKFEED, SIZE, GAP, BLINE, HOME, FORMFEED
 BACKFEED & BACKUP
Description
To back feed label with the specified length. The length is specified by dot.
Syntax
BACKUP n
BACKFEED n
Parameter Description
n unit: dot
1 ≤ n ≤ 9999
Example
BACKUP 40
BACKFEED 40
CAUTION: Improper back feed value may cause paper jam or ribbon wrinkle.
Note: 203 DPI: 1 mm = 8 dots
300 DPI: 1mm = 12 dots
See Also
FEED, SIZE, GAP, HOME, FORMFEED