~!C
Description
This command is used to check and return if RTC is installed or not.
Syntax
~!C
Parameter Description
0 RTC not installed
1 RTC installed
Example
~!C
~!D
Description
This command is used to enter DUMP mode.
Syntax
~!D
Parameter Description
None N/A
Example
~!D
~!F
Description
This command is used to inquire about files resident in the printer memory
and fonts installed in the memory module.
The filename is returned in ASCII characters. Each file name ends with
0x20. The ending character is 0x0D 0x1A.
Syntax
~!F
Parameter Description
None N/A
Example
~!F
See Also
FILES
To Next Page
Loading...
