File Management Commands
DOWNLOAD
Description
“DOWNLOAD” is a header of the file that is to be saved in the printer's
Memory(DRAM). The downloaded files can be divided to two categories: program file
and data file (including text data file, PCX graphic files and bitmap font file).
Syntax
1. Download a program file
DOWNLOAD [n,]“FILENAME.BAS”
Parameter Description
n Specify the memory which is used to save the
download files.
n is ignored Download files to DRAM only.
F: Download files to main board flash memory.
FILENAME.BAS The filename resident in printer memory.
Note:
(1). The filename is case sensitive.
(2). The extension of the program file must be “.BAS”
(3). If memory is not specified, all files will be downloaded to
DRAM.
No Battery is used to backup DRAM. The downloaded files
in DRAM will be lost in case turns off printer power.
To Next Page
Loading...
