HOME
Description
It is not expected the first label will be printed on the right position when the
printer power is turned on. This command will feed label to the beginning of
next label .The size and gap of the label should be setup in advance.
Syntax
HOME
Parameter Description
None N/A
Example
SIZE 4,2.5
GAP 2 mm,0
SPEED 4
DENSITY 7
DIRECTION 0
OFFSET 0.00
REFERENCE 0,0
SET PEEL OFF
SET COUNTER @0 +1
@0="000001"
HOME
CLS
BOX 1,1,360,65,12
TEXT 25,25,"3",0,1,1,"HOME COMMAND TEST"
TEXT 25,80,"3",0,1,1,@0
PRINT 3,1
See Also
FEED, SIZE, GAP, BLINE, FORMFEED
To Next Page
Loading...
