Technical Data
34 3A1782D
Technical Data
Working pressure range 0-207 BAR, 0-21 Mpa (0-3000 psi)
Electric Motor 4.5A (open frame, universal)
Operating horsepower 1/2
Maximum delivery (with tip) 1.02 lpm (.27 gpm)
Paint hose 6.4mm X 7.5 m (1/4 in. x 25 ft)
Maximum tip hole size 0.015 in (0.38 mm)
Weight, Sprayer only 6.0 kg (13.3 lb)
Weight, sprayer, hose, & gun 7.5 kg (16.5lb)
Dimensions (Upright):
Length 34.8 cm (13.7 in)
Width 41.1 cm (16.2 in)
Height 46.3 cm (18.2 in)
Dimensions (Folded):
Length N/A
Width N/A
Height N/A
Power cord 1.0 mm², 3-wire, 1.8 m (6 ft)
Fluid inlet fitting 1/4 npsm external thread
Fluid outlet fitting 3/4 in. internally threaded
(standard garden hose)
Inlet screen (on suction tube) 1190 micron (16 mesh)
Wetted parts, pump and hose stainless steel, zinc plated carbon steel, brass, ultra-high molecular weight
polyethylene (UHMWPE), Carbide, Nylon, Aluminum, PVC, polypropylene,
fluroelastomer
Wetted parts, gun aluminum, brass, carbide, nylon, ultra-high molecular weight polyethylene
(UHMWPE), zinc
Generator requirement 1500 Watt minimum
Electrical power requirement 220-240V AC 50/60 Hz, I phase, 10A
Storage temperature range◆❖ -35° to 71° C (-30° to 160° F)
Operating temperature range✔ 4° to 46° C (40° to 115° F)
◆ When pump is stored with non-freezing fluid. Pump damage will occur if water or latex paint freezes in pump.
❖ Damage to plastic parts may result if impact occurs in low temperature conditions.
✔ Changes in paint viscosity at very low or very high temperatures can affect sprayer performance.
To Next Page
Loading...
