Graco Husky 515 - Maintenance; Lubrication; Flushing and Storage; Preventive Maintenance

309116 11
Technical Data
Husky 515/716
Maximum fluid working pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 psi (0.7 MPa, 7 bar)
Air pressure operating range . . . . . . . . . . . . . . . . . . . . . . 30 –100 psi (0.2–0.7 MPa, 2.1–7 bar)
Operating Temperature Range*
Minimum (all pumps) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40°F (4°C)
Maximum
Acetal: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180°F (82°C)
Polypropylene: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150°F (66°C)
Aluminum, stainless steel, PVDF: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .225°F (107°C)
Weight
233045 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.0 lb (1.8 kg)
233046 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5 lb (2.0 kg)
233047 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.5 lb (2.9 kg)
233048 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.5 lb (4.3 kg)
Wetted parts
233045 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . polypropylene
233046 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . aluminum
233047 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . stainless steel
233048 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . stainless steel
Non-wetted parts (materials vary depending on kit). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
epoxy-coated steel, stainless steel, PTFE, nickel-plated steel,
polyethylene, polypropylene, aluminum, zinc-plated steel
*These temperatures are based on mechanical stress only and may be altered significantly by pumping certain chemi-
cals. Consult engineering guides for chemical compatibilities and temperature limits, or contact your Graco distributor.
Santoprene
®
is a registered trademark of the Monsanto Company.
For additional technical data specific to the pump, refer to instruction manual 308981.