Table
of Contents
Warnings 2.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Major
Components
5.
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setup 6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Airless
Operation
7.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operation
8.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flushing 10
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting 12
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Motor
Brush Replacement
14.
. . . . . . . . . . . . . . . . . . . . .
Displacement
Pump
16.
. . . . . . . . . . . . . . . . . . . . . . . . . .
Motor 17
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pressure
Control
19.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pressure
Control Repair
20.
. . . . . . . . . . . . . . . . . . . . . .
Bearing
Housing & Connecting Rod
23.
. . . . . . . . . . . .
Drive
Housing
24.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sprayer
Parts Drawing
26.
. . . . . . . . . . . . . . . . . . . . . . . .
Sprayer
Parts List
27.
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Accessories 30
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Technical
Data
30.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dimensions 30
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Graco
W
arranty 32.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Graco
Phone Number
32.
. . . . . . . . . . . . . . . . . . . . . . . . .
Symbols
Warning Symbol
WARNING
This
symbol alerts you to the possibility of serious
injury or death if you do not follow the instructions.
Caution Symbol
CAUTION
This
symbol alerts you to the possibility of damage to
or destruction of equipment if you do not follow the
instructions.
WARNING
FIRE AND EXPLOSION HAZARD
Improper
grounding, poor ventilation, open flames or sparks can cause a hazardous condition and
result in a fire or explosion and serious injury
.
If there is any static sparking or you feel an electric shock while using this equipment,
stop spray-
ing immediately
.
Do not use the equipment until you identify and correct the problem.
Provide fresh air ventilation to avoid the buildup of flammable fumes from solvents or the fluid
being sprayed.
Keep the spray area free of debris, including solvent, rags, and gasoline.
Electrically disconnect all equipment in the spray area.
Extinguish all open flames or pilot lights in the spray area.
Do not smoke in the spray area.
Do not turn on or of
f any light switch in the spray area while operating or if fumes are present.
Do not operate a gasoline engine in the spray area.