Accessories
French 185–955
Spanish 185–962
German 186–042
Greek 186–046
Korean 186–050
Apply
other
language here
DANGER
LABELS
The English language DANGER label shown on
page 4 is also on your sprayer
. If you have
painters who do not read English, order one of the
following labels to apply to your sprayer
. The
drawing below shows the best placement of these
labels for good visibility
.
Order the labels directly from your Graco
distributor.
T
exture Spray Gun Kit 237–476
Replacement 21.0 MPa (210 bar
, 3000 psi) texture
spray gun for the Mark V T
exture Sprayer
.
Ball V
alve Repair Kit 237–693
Replacement parts to repair pressure drain valves
239–280 and 237–469.
Gun Handle Kit 237–680
Replacement handle with safety for the 21.0 MPa (210
bar
, 3000 psi) texture spray gun 237–476.
Motor Brush Kit 222–157
For replacing motor brushes.
Technical
Data
Power
Requirements (full output)
220 V
AC, 50Hz,
.
. . .
1 phase, 10A minimum
W
orking Pressure Range
0–21.0 MPa (0–210 bar
, .
.
0–3000 psi)
Cycles/Liter (gallon)
27.5 (104).
. . . . . . . . . . . . . . . . . . .
Power
Cord
1.5 mm
2
, 3 wire, 3 m (10’)
.
. . . . . . . . . . . .
Fluid
Outlet Size
3/8 npsf from control
.
. . . . . . . . . . . . .
Sound
Data
Sound pressure level
85.3 db(A)
.
. . . . . . . . . . . . . . . . .
Sound power level
95.2 db(A)
.
. . . . . . . . . . . . . . . . . . .
Measured under maximum operating conditions per
ISO–3744
W
etted Parts:
Displacement Pump
Carbon steel, Polyurethane,
.
. .
Polyethylene,
Delrin
, Leather
Filter
Aluminum, Carbon steel, Stainless Steel,
.
. . . .
NOTE:
and Delrin
are a registered trade
-
marks of the Company
.
Dimensions
W
eight
(w/o
packaging, hose or gun)
62.3
kg (137 lb)
.
. . .
Height 787 mm (31 in.).
. . . . . . . . . . . . . . . . . . . . . . . . . .
Length 635 mm (25 in.).
. . . . . . . . . . . . . . . . . . . . . . . . . .
Width 572 mm (22.5 in.).
. . . . . . . . . . . . . . . . . . . . . . . . . .
To Next Page
Loading...
Need help?
General
