Know Your Controls
3A6342A 15
Know Your Controls
The ON/OFF power switch controls the
power to your sprayer.
The Pressure Control Knob increases or
decreases the pressure. It also has a setting
for Prime/Slow and FastFlush™.
The Prime/Spray Valve directs the fluid to
either the Drain Tube or the Hose and Spray
Gun. It is used to prime the sprayer, which
means to evacuate the air out of the pump,
Hose, and Spray Gun.
Your Spray Gun will not spray if there is air in
the system. It is necessary to prime the
pump, Hose, and Spray Gun any time air
enters the Suction Tube.
The Spray Tip is the key to airless spray
technology. High pressure paint pumped
through the very small hole in the Spray Tip
comes out as a spray.
The Spray Tip has the ability to be reversed
and quickly clear clogs.
To Next Page
Loading...
Need help?
General
