Graco Mark X User Manual

Start Up
3A6342A 19
Start Up
Pressure Relief Procedure
Follow the Pressure Relief
Procedure whenever you see this
symbol.
1. Turn ON/OFF switch to the OFF
position.
2. Engage the Trigger Lock. Always
engage the Trigger Lock when sprayer
is stopped to prevent the Spray Gun
from being triggered accidentally.
3. Turn Pressure Control Knob to OFF (all
the way counterclockwise).
4. Put Drain Tube into a waste pail and
turn Prime/Spray Valve down to PRIME
position to relieve pressure.
5. Hold the Spray Gun firmly to a
grounded pail. Point Spray Gun into
pail. Disengage the Trigger Lock and
trigger the Spray Gun to relieve
pressure.
6. Engage the Trigger Lock.
This equipment stays pressurized until
pressure is manually relieved. To help
prevent serious injury from pressurized
fluid, such as skin injection or splashed
fluid, follow the Pressure Relief
Procedure whenever sprayer is stopped
and before sprayer is cleaned or checked,
and before equipment is serviced.

Graco Mark X Specifications

General

Brand	Graco
Model	Mark X
Category	Paint Sprayer
Language	English