Graco Mark X User Manual

Technical Specifications
3A6342A 85
Transmitter Frequency (all models): 2.4GHz
Transmitter Power (all models): +8dBm
NOTE: FCC/IC Notice (all models)
Contains FCC ID: QOQBGM13P
Contains IC: 5123A-BGM13P
The enclosed device complies with Part 15 of
the FCC Rules and with Industry Canada
license-exempt RSS standard(s). Operation
is subject to the following two conditions:(1)
this device may not cause harmful
interference and (2) this device must accept
any interference received, including
interference that may cause undesired
operation.
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
All trademarks or registered trademarks are
the property of their respective owners.
Mark X Sprayers
U.S. Metric
Sprayer
Maximum Delivery 2.1 gpm 8.0 lpm
Maximum Tip Size 0.045 in. 0.045 in.
Fluid Outlet npsm 1/2 in. 1/2 in.
Cycles 70 per gallon 19 per liter
Generator Minimum 5000 W 5000 W
230V, A, Hz 16, 50/60
Dimensions
Weight:
Standard Series
154 lb 70 kg
ProContractor Series 178 lb 81 kg
IronMan Series 161 lb 73 kg
Height:
Standard and IronMan Series
29.9 in. (Handle down)
40.1 in. (Handle up)
76 cm (Handle down)
102 cm (Handle up)
ProContractor Series 39 in. 99 cm
Length:
Standard and IronMan Series
26 in. 66 cm
ProContractor Series 30 in. 75 cm
Width: 24 in. 61 cm
Wetted parts
zinc- and nickel-plated carbon steel, nylon,
stainless steel, PTFE, Acetal, leather,
UHMWPE, aluminum, tungsten carbide,
PEEK, brass
Noise Level:
Sound Power 91 dBa* 91 dBa*
Sound Pressure 82 dBa* 82 dBa*
*per ISO 3744;
measured at 3.1 ft
*per ISO 3744;
measured at 1 m

Graco Mark X Specifications

General

Brand	Graco
Model	Mark X
Category	Paint Sprayer
Language	English