Parts
312394ZAC 43
† Part not shown.
‡ Spare clamps will be provided with all clamp-down lid assemblies.
Ref Part Description
Quantity
LC0019, Lid assembly
with Relief
LC0020, Lid assembly
LC0021, Lid assembly,
120 V Agitator
LC0022, Lid assembly,
240 V Agitator
LC0023, Lid assembly,
Agitator, De-gas
LC0024, Lid assembly,
Agitator, De-gas
LC0025, Lid assembly,
Agitator, De-gas, Fill Port
LC0026, Lid assembly,
Agitator, De-gas, Fill Port
LC0130, Lid Assembly,
Pneumatic Agitator
LC0131, Clamp Down Lid,
Pneumatic Agitator, De-gas
LC0132, Clamp Down Lid,
Pneumatic Agitator, Fill Port
1005 --- Reference Only. Tank sold separately.‡ -----------
1006 95/0518/00 O-RING, fluoroelastomer, JJF 66666666666
1007 96/0282/98 FASTENER, screw, button head cap screw,
8-32 x 0.38, stainless steel
66666666666
1008 96/0820/98 CLAMP, over the center, stainless steel 33333333333
1009 96/0176-1/98 NUT, lock, 8-32, nylock, stainless steel 66666666666
1010 15M320 LID, 7L, 2 npt, 1 9/16-32 1 1
15M321 LID, 7L, 2 npt, 1 9/16-32, agitator 1111 11
15M322 LID, 7L, 2 npt, 9/16-32, agitator, fill port 11 1
1011 94/0752-D/97 VALVE, relief, 9/16-32, 5 psi 11111111111
1012
†94/0736/96
VALVE, drain cock, 1/4 npt, male, brass
1 11 1
1013
†94/0370/98
PLUG, socket head, 1/4 npt, stainless steel
111111 11
1014
†121090
FITTING, 1/4 npt expander
1
1015 255342 MANIFOLD, vacuum tree 1 1111 11
1016 94/0299/98 FITTING, elbow, str, 1/4 npt, 45, 3K 112223123
1017 255337 AGITATOR, motor assembly, 120V 1 1 1
255338 AGITATOR, motor assembly, 240V 1 1 1
02/1116/50 AGITATOR, assembly, pneumatic, TFM, 0.32 HP, 15:1 111
1018 95/0849/11 SEAL, posipak, 3/8 ID x 5/8 OD 111111111
1019 96/0733/87 WASHER, 3/8 x 7/8 x 0.062, PTFE 111111111
1020 97/2215/98 SPRING, wave, 0.86 x 0.65 x 0.010, stainless steel 111111111
1021 84/0120/98 BEARING, ball, 0.375ID, DS 222222222
1022 255339 AGITATOR, blade assembly 111111111
1023 96/0817/99 RING, retaining, external, 0.375, mild steel 222222222
1024 01/2212/70 HOUSING, bearing, electric agitator 111111111
1025 96/0005/98 WASHER, lock, #10, stainless steel 333333333
1026 96/0125/98 FASTENER, screw, socket head cap, 10-24X0.50,
stainless steel
333333333
1027 84/2215-B/11 COUPLING, alignment, 1 in. OD, disk, nylon 111111111
1028 84/2215-A/11 COUPLING, alignment, 1 in. OD, hub, 3/8 ID 111111111
1029 95/0117/00 O-RING, fluoroelastomer, jai 11 1
1030 01/1174-3/97 BULKHEAD, 1/4 npt, tank lid, thin, tfm 11 1
1031 96/0056/98 NUT, hex, jam, 3/4-16, stainless steel 11 1
1032 94/0300-1/98A FITTING, elbow, STRT, 90, 1/4 npt, male / female 11 1
1033 94/0320-1/99 FITTING, nipple, hex, 1/4npt, 5K, mild steel 11 1
1034 94/0900-R2/98 VALVE, ball, 2W, 1/4npt, female, 2000 psi 11 1
1035 87/0220-2/98 PLATE, slinger, tfm, 3/8ID, 5-1/2OD 11 1
1036 95/0524/01 GASKET, lid, tfm, nit 11111111111
To Next Page
Loading...
