Setup Mode
312776K 39
Advanced Setup Screen 5
This screen appears only if Flush and Fill Input is set to
“Global” in Option Screen 1, page 34 and Special Out-
puts is set to 1, 2, 3, or 4 in Configure Screen 5, page
33. The I/O board has four programmable outputs.
On-Purge
Delay time at the start of the purge cycle before the Spe-
cial Output turns on.
Length
Duration for the Special Output to be active during the
purge cycle.
On-Fill
Delay time at the start of the fill cycle before the Special
Output turns on.
Length
Duration for the Special Output to be active during the
fill cycle.
F
IG. 37. Advanced Setup Screen 5
To Next Page
Loading...
