Setup
20 311075R
a. Lift hose rack. Remove tank A
cover and pour ISO into tank A
(red side, with desiccant filter in
cover). Replace cover .
Desiccant filter is blue when fresh, and
turns pink when saturated. Be sure
shipping plugs are removed from open-
ings on desiccant filter.
b. Remove tank B cover and pour
resin into tank B (blue side).
Replace cover .
. Add thin coating of grease lubricant to tank o-ring if lid is difficult
to assemble to tank.
1
TI7017a
1
TI7018a
1
10. Purge air and flush fluid from
lines
a. Remove both recirculation tubes
(P) from the tanks and secure
each one in a dedicated waste
container.
b. Set function knob to Stop/Park
.
c. Plug in power cord(s). See TABLE
2, page 16.
d. Open both pump fluid inlet valves
(V, shown in open position).
TI7022a
P
V
TI7019a
To Next Page
Loading...
