Graco Super Nova 595 - User Manual

Questions and Answers:

H
Holly SmithSep 9, 2025
What to do if the pump is frozen or paint hardened in my Graco Super Nova 595 Paint Sprayer?
- G
  Gregory AlexanderSep 10, 2025
  If you're having basic mechanical problems with your Graco Paint Sprayer, such as a pump frozen or paint hardened in the pump, thaw the sprayer if water or water-based paint has frozen inside by placing it in a warm area until completely thawed. Do not start the sprayer until it is fully thawed. If paint has hardened (dried) inside, replace the pump packings.
H
heatherbradySep 12, 2025
How to fix loose motor leads on my Graco Paint Sprayer?
- S
  susanhoganSep 12, 2025
  If you're facing basic electrical problems with your Graco Paint Sprayer's motor leads, replace any loose terminals by crimping them to the leads, ensuring they are firmly connected. Clean the circuit board terminals and securely reconnect the leads.
A
Adrian MillerSep 14, 2025
How to fix the displacement pump connecting rod pin on my Graco Paint Sprayer?
- M
  Melissa FritzSep 14, 2025
  If you're dealing with basic mechanical problems on your Graco Paint Sprayer and the displacement pump connecting rod pin isn't fully pushed into the connecting rod, push the pin into place and secure it with the spring retainer.
D
derek14Sep 16, 2025
What to do if my Graco Super Nova 595 Paint Sprayer stops after a few minutes due to a tight pump packing nut?
- K
  Kevin FrancisSep 16, 2025
  If your Graco Paint Sprayer quits after operating for 5 to 10 minutes, and you suspect the tightness of the pump packing nut, loosen the packing nut and check for leaking around the throat. Replace the pump packings if necessary.