EasyManua.ls Logo

Graco Ultra 695 - Caractéristiques Techniques; Dimensions; Technical Data

Graco Ultra 695
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical Data
313437A 55
Technical Data
Basic Sprayer Wetted Parts..............................
zinc- and nickel-plated carbon steel, nylon, stainless steel, PTFE,
Acetel, leather, UHMWPE, aluminum, tungsten carbide, PEEK,
brass
Noise Level
Sound power ............................................... 91 dBa*
Sound pressure ........................................... 82 dBa*
*per ISO 3744; measured at 3.1 feet (1 m)
Dimensions
Caractéristiques techniques
Pièces principales du pulvérisateur au contact du produit......................
acier au carbone galvanisé et nickelé, nylon, acier inox, PTFE, acétal,
cuir, UHMWPE, aluminium, carbure de tungstène, PEEK, laiton
Niveau de bruit
Puissance sonore ...........................91 dBa*
Pression sonore..............................82 dBa*
*selon ISO 3744; mesuré à 3,1 pieds (1 m)
Dimensions
Model
220 - 240V
A, Hz
Generator
Minimum W
Motor HP
(W)
Cycles per
gallon (liter)
Maximum
Delivery gpm
(lpm)
Maximum
Tip Size
Fluid Outlet
npsm1 Gun 2 Guns
695
9,
50/60
5000 1.75
(1300)
243 (64) 0.75 (2.8) 0.027 N/A 1/4 in.
795
10,
50/60
5000 2.00
(1490)
195 (52) 0.95 (3.6) 0.031 0.021 1/4 in.
1095
10,
50/60
5000 2.20
(1640)
123 (33) 1.1 (4.1) 0.035 0.023 1/4 in.
Mark V
10,
50/60
5000 2.20
(1640)
123 (33) 1.25 (4.7) 0.035 0.022 3/8 in.
Model Weight lb (kg) Height in (cm) Length in (cm) Width in (cm)
695 94.0 (43.0) 38.75 (98.4) 25.75 (65.4) 20.5 (52.1)
795 98.0 (45.0) 38.75 (98.4) 25.0 (63.5) 20.5 (52.1)
1095 120.0 (55.0) 38.5 (97.8) 26.0 (66.0) 22.5 (57.2)
Mark V 130.0 (59.0) 38.5 (97.8) 26.0 (66.0) 22.5 (57.2)
Modèle
220 – 240 V
A, Hz
Génératrice
Minimum W
Moteur
CV (W)
Cycles par
gallon (litre)
Débit
maximum
gpm (l/min)
Taille maximale
de la buse
Sortie
produit
npsm
1
pistolet
2
pistolets
695
9,
50/60
5000 1,75
(1300)
243 (64) 0,75 (2,8) 0,027 N/D 1/4”
795
10,
50/60
5000 2,00
(1490)
195 (52) 0,95 (3,6) 0,031 0,021 1/4”
1095
10,
50/60
5000 2,20
(1640)
123 (33) 1,1 (4,1) 0,035 0,023 1/4”
Mark V
10, 50/60 5000 2,20
(1640)
123 (33) 1,25 (4,7) 0,035 0,022 3/8”
Modèle Poids lb (kg) Hauteur en (cm) Longueur en (cm) Largeur en (cm)
695 94,0 (43,0) 38,75 (98,4) 25,75 (65,4) 20,5 (52,1)
795 98,0 (45,0) 38,75 (98,4) 25,0 (63,5) 20,5 (52,1)
1095 120,0 (55,0) 38,5 (97,8) 26,0 (66,0) 22,5 (57,2)
Mark V 130,0 (59,0) 38,5 (97,8) 26,0 (66,0) 22,5 (57,2)

Table of Contents

Related product manuals