Section 1 - General Safety Practices
1-582104002
Slip and Fall Hazard
• Always maintain 3-point contact using proper hand holds and steps provided
when mounting or dismounting. Never grab control levers or steering wheel
when mounting or dismounting machine.
• Repair or replace damaged steps and grab handles.
• Keep grab handles, steps, and walkways free of mud, oil, grease and other
foreign material. Replace non-skid surface material as required.
• Do not get off machine until shutdown procedure has been performed.
• Align upperstructure with undercarriage before dismounting.
• Keep others off machine while in operation.
• Do not lift personnel with this machine.
To Next Page
Loading...
