Gradall D152 - Section 7 - Specifications; Product Specifications; Lubrication & Fluid Capacities

Section 7 - Specifications
7-182104002
SECTION 7 - SPECIFICATIONS
7.1 PRODUCT SPECIFICATIONS
Lubrication & Fluid Capacities
Note: Lubricants described in this table are used in standard machines when they
are shipped from Gradall Industries, Inc.
Hydraulic System
System Capacity .......................................................................62 gallons (235 liters)
Type of Oil ........... Mobilfluid
®
424 Tractor Hydraulic Fluid (ISO 46)** (p/n 80533031)
Upperstructure Cab Heater
Capacity ....................................................................................1.3 gallons (4,9 liters)
Type of Fluid......................Conoco Heat Transfer 32 Hydraulic Fluid (p/n 80533049)
Swing Transmission
Capacity ...................................................................................2.47 quarts (2,3 liters)
Type of Fluid..............................................................Gear Oil 80w90 (p/n 80533027)
Swing Brake
Capacity ...................................................................................... 4 ounces (0,1 liters)
Type of Fluid........ Mobilfluid
®
424 Tractor Hydraulic Fluid (ISO 46)** (p/n 80533031)
Tilt Drive
Capacity .................................................................................... 43 ounces (1,2 liters)
Type of Fluid..............................................................Gear Oil 80w90 (p/n 80533027)
Grease Fittings
Capacity ....................................................................................................as required
Type of Lube..................................................................... Extreme Pressure Lube #2
* Capacities are approximate - Check level to be sure
** Hydraulic Fluid Specifications; Pour Point -46°F., SSU @ 100° F. 275;
Flash Point 442° F. Approved Supplier & Type: Mobil Mobilfluid 424