Section 2 - Pre-Operation and Controls
2-382104002
4. Fuel Tank - Check fuel level, refill as required; filler cap securely fastened.
5. DEF (Diesel Exhaust Fluid) Tank
- Check DEF level, refill as required.
6. Battery Box
- Battery cables tight, no visible damage or corrosion. Battery box
cover properly latched.
7. Upperstructure Cab
-
• General appearance; no visible damage; Operator & Safety manual located
in manual drawer.
• Grab handles and steps secure and clean.
• Window glass and mirrors clean and unobstructed. Adjust mirrors for
maximum visibility, before and during operation. Be sure windows and doors
securely latch in open and closed position. Replace damaged latches
immediately.
• Check seat belt (if equipped) for damage, replace belt if frayed or cut
webbing, damaged buckles or loose mounting hardware.
8. AC/Heater Cover
- Ensure cover is securely latched. Replace damaged latches
immediately.
9. Rear Axle/Fender
- Check mud flaps for proper position and condition for
highway operation; brakes undamaged.
10. Wheel/Tire Assemblies
- No loose or missing lug nuts; proper inflation; No
damage to rims or tires; axle bolts torqued.
11. Rear Axle/Fender
- Check mud flaps for proper position and condition for
highway operation; brakes undamaged.
12. Main Control Valve and Cover
- See Inspection Note. Ensure cover is securely
latched. Replace damaged latches immediately.
13. Center Pin
- See Inspection Note.
14. Tilt Gear
- Properly lubricated.
15. Air Tanks
- Check for damage/leaks; open petcocks to eliminate condensation.
16. Boom
-
• Rollers properly adjusted; no visible damage to boom hoses/tubes
• Boom secure if machine is to be driven on highway.
17. Hydraulic Reservoir
- Recommended fluid level on sight gauge; filler/breather
cap secure and working; oil is clear.
18. Attachment
- Properly installed.
To Next Page
Loading...
