Section 3 - Operation
3-1382104002
5. If required, press left side of tilt switch (I) to tilt
counterclockwise or right side of switch (J) to
tilt clockwise.
6. While pushing forward on right joystick (B) to
lower boom and force bucket into ground, pull
back on left joystick (E) to retract boom and fill
bucket.
7. As bucket is filling, jog right joystick forward
(B) to lower boom and maintain depth of cut.
At same time jog right joystick to right (C) to
open bucket and maintain proper bucket
angle.
To Next Page
Loading...
