Graflex 35 - img009

CABLE RELEASE
An accessory cable release can be u sed
at any speed. It is particularly useful
to avoid camera movement when slow
speeds are used. Any standard Euro-
pean or American made cable release
will fit. When using slow shutter
speeds, be sure the camera is on a tripod
or any other steady support.
U SI NG SLOW SPEEDS
The B ( bulb setting ) is for long exposures. Cock the shutter. Press the body release
lever to the right and hold it there. The shutter will remain open until the release
lever is freed. Use B and the slower speeds such as 1, 1/2 and 1/ 10 only when the
camera is on a solid support such as a Graphic tripod. The use of a cable release
will further eliminate the possibility of camera vibration.
TI ME E XPOSURES
For time exposures - exposures of several seconds or more - use the B setting
described above with a cable release as directed. A TBl cable release is a special
type of cable release which can be locked down to hold the shutter open for long
exposures. Your Graflex dealer can supply this special release for you. IMPOR-
TANT: When a cable release has been used, the film transport will remain locked.
See next page for release of the film winding knob.
9