2.
Press Dial key or Speaker key . The handsets will use the default outgoing line to dial out.
3.
To terminate the call, press Hang-Up key .
Note: To change the default outgoing line, please refer to [Outgoing Default Line].
Selecting the outgoing line:
1. Enter the desired number using the keypad.
2. Press the left softkey “Call”.
3. Select the desired line to dial out.
4.
To terminate the call, press Hang-Up key .
Method 2:
1.
Press Dial key or
Speaker key
to enter the pre- dialing screen.
2. Enter the number to dial using the keypad.
3.
Press Dial key , # key (“Use # as dial key” must be configured in web configuration) or wait for 4 seconds and the
call will be initiated automatically.
4.
To terminate the call, press Hang-Up key .
During the call, you can switch the call mode by pressing the corresponding keys and cancel the dialing operation by pressing
the on-hook key. During the call conversations, you can press the left and right navigation keys to adjust the volume. The call
duration is displayed on the LCD screen while the call is in progress and call summary will be displayed once the call is
terminated.
Dialing from Call history
Users may use their call history entries to initiate calls.
1. Press Menu to bring up operation menu.
2.
Use arrow keys to reach Call History Icon and then press “Select”.
3.
Select the desired entry, then press Dial key to establish the call.
Note: In step 3, users can press “Options” softkey followed by “Edit Dial” option to initiate the call.
The call history list stores the last dialed phone numbers. When the memory of the redial number list is full, the handsets will
automatically erase the oldest dialed number when a new number is dialed
Dialing from Phonebook
Users may use their private or shared contacts to initiate calls.
1. Press Menu to bring up operation menu.
2. Press Contacts to access phonebook menu.
3. Select the contact to call.
Note
To dial “+” please keep pressing “0” key for about 2 seconds.
To dial from contacts list, choose a contact using navigation keys and press Dial key.
To Next Page
Loading...
Need help?
General