4.
Press Dial Key to initiate the call.
Note: In step 4, users can press “Options” softkey followed by “Edit Dial” option to initiate the call.
Intercommunication
Users may make phone calls between different handsets directly without remembering each user’s phone number.
1. Go to Handset GUI -> Shortcut
2. Configure a navigation key (up, down, left or right key) to “Intercom”.
3. Press the key just configured at the idle state.
4. Choose the handset name that you want to call.
Shortcut Setting
Answering Calls
When receiving an incoming call, you can answer the call using following steps:
Earpiece mode:
Press Dial Key to pick up the call, or “Accept” softkey (left softkey).
Speakerphone mode:
Press Speaker Key to pick up the call.
Headset mode:
Press Dial Key to pick up the call, or “Accept” softkey using a connected headset.
Auto Answer
Note
Redialing can be performed via the pound key “#” when configured accordingly.
Notes
To answer an incoming call during an established call, press Dial Key , or the Speaker Key , or the “Answer”
softkey. The incoming call is answered, and the original call is placed on hold.
You can switch off the ringer temporarily by pressing Silent softkey.