Users can enable Auto Answer feature to accept and automatically answer incoming calls.
If enabled, DP722/DP730 Handsets will automatically answer incoming calls using speaker mode.
To activate / deactivate the auto answer feature:
Using DP722/DP730 Handsets Menu
1. Press Menu to bring up operation menu.
2. Select Preferences 𔪠navigate to Auto Answer using the up/down arrow keys.
3. Switch between Enabled/Disabled using left/right arrow keys and āSaveā after Enabling / Disabling the option.
Using DP755 Base Station Web Interface
1. Access DP755 Base Station Web Interface.
2. Go to DECT 𔪠Handsets Settings 𔪠HS# Settings.
3. Set āEnable Auto Answerā to āYesā. (By default, set to āNoā).
Off-Cradle Pickup
Users can enable Off-Cradle Pickup feature to automatically answer incoming calls after picking up DP722/DP730 Handsets
from its cradle. Incoming calls will be automatically answered using earpiece mode.
To activate / deactivate the off-cradle pickup:
Using DP722/DP730 Handsets Menu
1. Press Menu to bring up operation menu.
2. Select Preferences 𔪠navigate to Off-Cradle Pickup using the up/down arrow keys.
3. Switch between Enabled/Disabled using left/right arrow keys and āSaveā after Enabling / Disabling the option.
Using DP755 Base Station Web Interface
1. Access DP755 Base Station Web Interface.
2. Go to DECT 𔪠Handsets Settings 𔪠HS# Settings.
3. Set āEnable Onhook on Cradle Repositionā to āYesā. (By default, set to āNoā).
Ending Calls
To terminate the calls, press Hang-Up key .
On-Cradle Hang-up
Users can enable On-Cradle Hang-up feature to automatically end ongoing calls after placing DP722/DP730 Handsets on its
cradle.
To activate / deactivate the on-cradle hang-up feature:
Using DP722/DP730 Handsets Menu
1. Press Menu to bring up operation menu.
2. Select Preferences 𔪠navigate to On-Cradle Hang-up using the up/down arrow keys.
3. Switch between Enabled/Disabled using left/right arrow keys and āSaveā after Enabling / Disabling the option.
Note
DP722/DP730 Handsets should be resting on its cradling and then picked up for this feature to work.
āAuto Answerā feature should be set to āNoā to work properly.