DP722 Batteries Specifications DP730 battery specifications
Technology: Nickel Metal Hydride (Ni-MH)
Size: AAA
Voltage: 1.2V
Capacity: 800mAh
Charging time: 12 hours from empty to full
Standby time: up to 250 hours
Talk time: up to 20 hours’ active talk time
Technology: Li-ion
Nominal Voltage: 3.8V
Capacity: 1500mAh
Charging time: 12 hours from empty to full
Standby time: up to 500 hours
Talk time: up to 40 hours’ active talk time
Table 10: DP722/DP730 Battery Specifications
In order to get the best performance of your DP730/DP722 Handsets, we recommend using original batteries provided in the
package or batteries compliant with above specifications.
Setting up the Charge Station
Please refer to the following steps for setting up the charge station and charging the Handsets:
1. Connect the DC plug on the power adapter to the micro-USB connector on the charge station.
2. Connect the other end of the power adapter into an electrical power outlet.
3. After setting up the Handsets and the charge station, place the Handsets in the charge station.
Note
Please charge the batteries fully before using the Handsets for the first time.
Disclaimer
The abovementioned battery specifications can vary and depend on many factors (age of the battery, number of recharge
cycles, real capacity…). The recharge cycles of the battery are limited; thus, it might need to be replaced if the battery
performance is low. The number of charge cycles and battery life are affected by usage and configuration.
Important Note
Be careful when inserting the batteries into your handset to avoid any risk of short-circuit, which lead to damage your batteries
and/or the handset itself. Do not use damaged batteries which can increase the risk of serious harm.
To Next Page
Loading...
Need help?
General