Packag
e
Conten
t
GXP2135 phone, handset with cord, base stand, universal power supply, network cable, Quick Start Guide
Compli
ance
FCC Part 15 (CFR 47) Class B; EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3, EN 60950-1, EN62479,
AS/NZS CISPR 22 Class B, AS/NZS CISPR 24, RoHS; UL 60950 (power adapter)
Table 7: GXP2135 Technical Specifications
INSTALLATION
Equipment Packaging
Main Case Yes 1
Handset Yes 1
Phone Cord Yes 1
Power Adaptor Yes 1
Ethernet Cable Yes 1
Phone Stand Yes 1
Wall Mount Yes 1
Quick Start Guide Yes 1
Table 8: GXP2130/GXP2140/GXP2160/GXP2170/GXP2135 Equipment Packaging
Handset Port RJ9 handset connector port
Headset Port RJ9 headset connector port (supporting EHS with Plantronics headset)
USB Port USB port connecting a USB flash drive. (only on GXP2140/GXP2160/GXP2170)
LAN Port 10/100/1000Mbps RJ-45 port connecting to Ethernet
PC Port 10/100/1000Mbps RJ-45 port connecting to PC
EXT Port RJ11 connector port to connect the GXP2200EXT Board (only on GXP2140/GXP2170)
Power Jack 12V DC Power connector port
Table 9: GXP2130/GXP2140/GXP2160/GXP2170/GXP2135 Connectors
To set up the GXP2130/GXP2140/GXP2160/GXP2170/GXP2135, follow the steps below:
1. Attach the phone stand or wall mount to the back of the phone where there are slots.