Turns on/off the Bluetooth feature.
Handsfree Mode
Enables/Disables Handsfree mode
Bluetooth Name
Specifies GXP phone name when discovered by other Bluetooth devices.
Start Scan
Starts to scan other Bluetooth devices around the phone. If found, user could press “Pair” Softkey, and enter Pin code
to pair to other Bluetooth devices.
Upgrade
Firmware Server
Configures firmware server for upgrading the phone.
Config Server
Configures config server for provisioning the phone.
Upgrade Via
Specifies upgrade/provisioning via TFTP/HTTP/HTTPS/FTP/FTPS.
Start Provision
Starts Provision immediately.
Language Download
Auto Language Download
Language Download
Factory Functions
Diagnostic Mode
All LEDs will light up. All keys’ name will display in red on LCD screen before diagnosing. Press any key on
the keypad to diagnose the key’s function. When done, the key’s name will display in blue on LCD. Lift and
put back the handset to exit diagnostic mode.
Audio Loopback
Speak to the phone using speaker/handset/headset. If you can hear your voice, your audio is working fine. Press
“Exit” Softkey to exit audio loopback mode.
LCD on/off
Selects this option to turn off LCD. Press any button to turn on LCD.
LCD Diagnostic
Enters this option and press Left/Right Navigation key to do LCD Diagnostic. Press “Exit” Softkey to quit.
Certificate Verification
This is used to validate certificate chain for the server’s certificate.
UCM Detect
Detect/connect UCM server to process auto-provision. Manually input the IP and port of the UCM server phone
wants to bind with; Or select from the available UCM server in network.
Authentication
To Next Page
Loading...
