Figure 46: Conference Action Page
When clicking on the softkey, it will take user to a target selection page in which user can choose other possible
transfer/conference targets.
2. Under target selection page screen
Target selection page provides a list of possible transfer/conference targets.
Figure 47: Target Source Page
User can use up/down key to select target from list and use menu key or “Select” softkey to choose the target. By selecting
Local/Broadsoft Phonebook, Local/Broadsoft Call Log and LDAP Directory,
LCD will display according menu page. Also, in these pages, softkey will show limited options (e.g. Dial) to make it easier for
user to perform the dialing task.
Figure 48: Call History Page
By selecting “Smart VPK Target”, a list of available VPK for transfer/conference will be shown as bellow. User can use up/down
key or “select” softkey to choose item to use.
Available VPK contains VPK with mode as below:
Speed Dial (current account)
Speed Dial via Active Account (any account)
BLF or Eventlist BLF (current account)
Presence (current account)
To Next Page
Loading...
