HT818 Administration Guide
Version 1.0.27.2
Use ARP to detect
network connectivity
Uses ARP to check the network connectivity.
Default setting is Yes.
Verify host when using
HTTPS
Enables / disables the host verification when using HTTPS.
Firmware upgrade and
provisioning
Selects firmware upgrade/provisioning method:
TFTP, HTTP/HTTPS or FTP/FTPS.
Sets IP address or domain name of firmware server. The URL of the server that
hosts the firmware release. Default is fm.grandstream.com/gs
Sets IP address or domain name of configuration server. The server hosts a copy
of the configuration file to be installed on the HT818.
Default is fm.grandstream.com/gs
Decrypts XML configuration file when encrypted. The password used for
encrypting the XML configuration file using OpenSSL.
HTTP/HTTPS/FTP/FTPS
User Name
Enters user name to authenticate with HTTP/HTTPS/FTP/FTPS server.
HTTP/HTTPS/FTP/FTPS
Password
Enters password to authenticate with HTTP/HTTPS/FTP/FTPS server.
Checks if firmware file is with matching prefix before downloading it. This field
enables user to store different versions of firmware files in one directory on the
firmware server.
Checks if firmware file is with matching postfix before downloading it. This field
enables user to store different versions of firmware files in one directory on the
firmware server.
Checks if configuration files are with matching prefix before downloading them. It
allows user to store different configuration files in one directory on the provisioning
server.
Checks if configuration files are with matching postfix before downloading them. It
allows user to store different configuration files in one directory on the provisioning
server.
Allow DHCP Option
66 or 160 to Override
Obtains configuration and upgrade server’s information using options 66 from
DHCP server.