EasyManuals Logo

Grandstream Networks HT818 Administration Guide

Grandstream Networks HT818
75 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #44 background imageLoading...
Page #44 background image
P a g e | 43
HT818 Administration Guide
Version 1.0.27.2
Restore From Backup
Configuration
Upload backup file to the ATA to restore your saved configuration
Profiles Pages Definitions
Table 9: Profiles Pages
Profiles (1,2)
Profile Active
Activates / Deactivates the accounts. The FXS port configuration will not change if
disabled, although the port will not be operational, in this state, there will be no dial
tone when picking up the analog phone, and making/receiving calls will not be
possible.
Primary SIP Server
Configures SIP server IP address (Supports both IPv4 and IPv6 addresses) or
domain name provided by VoIP service provider. (For example:
sip.mycompany.com, IPv4: 192.168.5.170, or IPv6: fe80::20b:82ff:fe75:211d). This
is the primary SIP server used to send/receive SIP messages from/to HT818.
Failover SIP Server
Defines failover SIP server IP address (Supports both IPv4 and IPv6 addresses)
or domain name provided by VoIP service provider. (For example:
sip.mycompany.com, IPv4: 192.168.5.170, or IPv6 fe80::20b:82ff:fe75:211d:). This
server will be used if primary SIP server becomes unavailable.
Prefer Primary SIP
Server
Selects to prefer primary SIP server. The account will register to primary Server if
registration with Failover server expires.
Default is No.
Outbound Proxy
Specifies IP address (Supports both IPv4 and IPv6 addresses) or domain name of
outbound Proxy, or media gateway, or session border controller. (For example:
proxy.myprovider.com, IPv4: 192.168.5.170, or IPv6: fe80::20b:82ff:fe75:211d). It’s
Used by HT818 for firewall or NAT penetration in different network environments.
If symmetric NAT is detected, STUN will not work and only outbound proxy can
correct the problem.
Backup Outbound Proxy
Configures the backup outbound proxy to be used when the “Outbound Proxy”
registration fails. (For example: proxy.myprovider.com, or IP address, if any:
IPv4: 192.168.5.170/ IPv6: fe80::20b:82ff:fe75:211d). By default, this field is left
empty.
Prefer Primary
Outbound Proxy
If the user configures this option to “Yes”, when registration expires, the device will
re-register via primary outbound proxy. By default, this option is disabled.

Table of Contents

Other manuals for Grandstream Networks HT818

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Grandstream Networks HT818 and is the answer not in the manual?

Grandstream Networks HT818 Specifications

General IconGeneral
BrandGrandstream Networks
ModelHT818
CategoryTelephone Accessories
LanguageEnglish

Related product manuals