HT818 Administration Guide
Version 1.0.27.2
Specify the Transport Type of OpenVPN whether UDP or TCP. Default is UDP.
Enable OpenVPN LZO
Compression
Enable OpenVPN LZO Compression. Default is Yes.
Select the OpenVPN Encryption. Default is BF-CBC 128 bit (default key).
Select the OpenVPN Digest. Default is SHA1.
Specifies the OpenVPN CA. Maximum Character Number is 8192.
Specifies the OpenVPN Certificate. Maximum Character Number is 8192.
Specifies the Client Key. Maximum Character Number is 8192.
Specifies the Client Key. Maximum Character Number is 8192.
OpenVPN Client Key
Password
Configures the OpenVPN Client Key Password. Maximum Length is 64.
Sets ring cadences for all incoming calls. Syntax: c=on1/off1-on2/off2-on3/off3;)
Default is set to c=2000/4000; (US standards) on1 is the period of ringing ("On
time" in "ms") while off1 is the period of silence. Up to three cadences are
supported.
Call Progress Tones
• Dial tone
• Ring back tone
• Busy tone
• Reorder tone
• Confirmation tone
• Call-Waiting tone
• Prompt Tone
• Conference Party
Hang-up Tone*
Configures tone frequencies according to user preference. By default, the tones
are set to North American frequencies. Frequencies should be configured with
known values to avoid uncomfortable high pitch sounds. ON is the period of ringing
(ON time in ms) while OFF is the period of silence. In order to set a continuous
ring, OFF should be zero. Otherwise it will ring ON ms and a pause of OFF ms and
then repeats the pattern.
Please refer to the document below to determine your local call progress tones:
http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf
* “Conference Party Hang-up Tone” will apply only if the “Special Feature” is set to
“MTS”.
Specifies the key pattern to get Prompt Tone. Maximum 20 digits
Locks configuration update via keypad. Default is No.
Removes ability to use integrated voice prompt menu configuration.
To Next Page
Loading...
Need help?
General
