Grandstream Networks HT818 Administration Guide

P a g e | 41
HT818 Administration Guide
Version 1.0.27.2
create the second file.
• When “SIP File Option” is set to Default “Keep”, device will keep the call
records when both files are full, no more new record will be stored.
• When this feature is set to “Override”, device will clear the first SIP file and
start storing again.
The SIP file output will be available at Status page: [SIP File]
Note: “Send SIP Log” must be enabled to be able to capture the trace.
Disable Weak TLS
Cipher Suites
This feature allows users to disable weak ciphers. The given choices are:
1- Enable Weak TLS Ciphers Suites.
2- Disable Symmetric Encryption RC4/DES/3DES.
3- Disable Symmetric Encryption SEED.
4- Disable All Of The Above Weak Symmetric Encryption.
5- Disable Symmetric Authentication MD5.
6- Disable All Of The Above Weak Symmetric Authentication.
7- Disable Protocol Version SSLv2/SSLv3.
Default is Enable Weak TLS Ciphers Suites.
Minimum TLS Version
The Feature allows users to choose the Minimum TLS Version. Choices are:
1- Unlimited.
2- TLS 1.0.
3- TLS 1.1.
4- TLS 1.2.
Default is Unlimited.
Maximum TLS Version
The Feature allows users to choose the Maximum TLS Version. Choices are:
1- Unlimited.
2- TLS 1.0.
3- TLS 1.1.
4- TLS 1.2.
Default is Unlimited.
Syslog Protocol
Allows the users to customize the Syslog Protocol and use either UDP (Default)
or SSL/TLS.
Syslog Server
Sets IP address or URL of system log server. The server collects system log
information from the HT818.
Note: A reboot is required to take effect.

Grandstream Networks HT818 Specifications

General

Brand	Grandstream Networks
Model	HT818
Category	Telephone Accessories
Language	English