EasyManuals Logo

Grandstream Networks HT818 Administration Guide

Grandstream Networks HT818
75 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #59 background imageLoading...
Page #59 background image
P a g e | 58
HT818 Administration Guide
Version 1.0.27.2
Ring tones
Configures the ring tone cadence preferences. User has 10 choices. The
configuration, completed in Distinctive Ring Tones block in the same page, applies
to ring tones cadences configured here.
Distinctive Call Waiting
Tone
This feature allows users to configure call waiting tones depending on the caller
ID. Up to 3 Distinctives tones can be configured. Default is Call Waiting Tone 1.
Call Waiting Tones
This feature allows user to customize call waiting tones. Up to 10 tones can be
configured. Default is “f1=440@-13,c=300/10000”
Call Features Settings
Enable Call Features
When enabled, Do No Disturb, Call Forward and other call features can be used
via the local feature codes on the phone. Otherwise, the ITSP feature codes will
be used. Enable All will override all individual features enable setting. Default is
Yes
Reset Call Features
Allows users to reset all call features configuration. Default is No
SRTP Feature
Allow users to customize the SRTP feature codes. Default is Yes
- Enable SRTP: Default is 16
- Disable SRTP: Default is 17
SRTP per call Feature
- Enable SRTP per call: Default is 18
- Disable SRTP per call: Default is 19
CID Feature
Allow users to customize the CID feature codes. Default is Yes
- Enable CID: Default is 31
- Disable CID: Default is 30
CID per call Feature
- Enable CID per call: Default is 82
- Disable CID per call: Default is 67
Direct IP Calling Feature
Allow users to customize the Direct IP feature code. Default is Yes
- Direct IP Calling: Default is 47
CW Feature
Allow users to customize the CW feature codes. Default is Yes
- Enable CW: Default is 51
- Disable CW: Default is 50
CW per call Feature
- Enable CW per call: Default is 71
- Disable CW per call: Default is 70
Call Return Feature
Allow users to customize the Call Return feature code. Default is Yes
- Call return: Default is 69

Table of Contents

Other manuals for Grandstream Networks HT818

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Grandstream Networks HT818 and is the answer not in the manual?

Grandstream Networks HT818 Specifications

General IconGeneral
BrandGrandstream Networks
ModelHT818
CategoryTelephone Accessories
LanguageEnglish

Related product manuals